Filter
Top Products
On-screen Manual
>
Scanning Guide
>
Troubleshooting
> Problems with Scanning Film > Image Becomes Too Dark or
Too Bright When a Cropping Frame Is Moved, Enlarged or Reduced
Image Becomes Too Dark or Too Bright When a Cropping
Frame Is Moved, Enlarged or Reduced
Check: Follow these steps from the Advanced Mode tab of ScanGear
(scanner driver).
1.
Click Preview.
The preview images are refreshed.
When the whole film image is displayed, click (Whole Film Image) on the Toolbar to display the
thumbnails.
2.
Click Apply in the Apply the tone value to all frames section.
If the Apply the tone value to all frames section is not displayed, click of Exposure/Tone Settings.
3.
Specify a cropping frame and click Scan.
Scanning starts.
Page top
Page 284 of 308 pagesImage Becomes Too Dark or Too Bright When a Cropping Frame Is Moved,...