Filter
Top Products
Field Test Unit Software
Note:- all programs on the cassette are stored twice. This means
the
message “SKIP : FTUC” might appear on the screen first before
the
next file is loaded
8. Type:- NEW then press Return
All FTU programs are now loaded and ready to use.
9. Type:- RUN “FTUC” then press Return
(To begin FTUC operating. Press BREAK key then RUN
“LOAD” or RUN “COPY” to begin those programs)
2.4
LOADING “PLOT’ IN 16K
RAM
FTU
The Model
6302A
Software
Support (Version
V#5.0
or later) requires a
16k
memory FTU (Canon X-07), therefore only the Print/Plot Package can
be loaded into the FTU If the
FTU
has been expanded to
24k,
then other
FTU
utilities may also be loaded and the Print/Plot Package may be saved
as a RAM file in the FTU.
To load program “PLOT” (the Print/Plot Package):-
1.
DELETE all
RAM
files in the FTU (or perform Step 1.
above).
2.
Connect cassette player (Step 2. above) and insert tape, side
B.
3.
Type:- FSET 2300 then press Return
4.
Type:- CLOAD “PLOT” then press Return
(The system should respond with ‘Found:PLOT’ and con-
tinue to load the program into the FTU)
Note:- don’t save “PLOT” in the RAM file area (in a
16k
FTU).
5. Type:- RUN then press Return
(To begin execution of the Print/Plot package).
Section 2.
GETTING
STARTED 7