Filter
Top Products
Field Test
Unit
Software
Enter COMMAND
Name of command file,extension (,F is
file name,type default extension)
Enter
the name you
of the command file you wish to create or use
. ____
PLot, PRint, Load or
PL = Plot data logger information
Unload
PR = Print data logger information
L =
Load file
into the logger
U = Unload data logger into file
Enter the function you wish PLOT to perform. Either PL to PLOT data, PR
to PRINT data, L to LOAD data from storage device to a logger or U to
UNLOAD data from a logger to storage device
Cassette or Ram file
C = Cassette storage
INPUT file, or input
R = Ram storage
from Logger?
L = Direct from logger
Enter the storage device that data is to be printed/plotted from
Cassette or Ram file
C = Cassette storage
INP
UT
file
R = RAM storage
Enter the storage device data is to be loaded from
Cassette or
Ram file C = Cassette storage
OUTPUT
file?
R = RAM storage
(24K
F.T.U. only)
Enter the storage device data is to be unloaded to
Enter Output file
Name of data file,extension (,D is default
name,type
extension)
Enter the name you wish give your stored data. This name will be used for
subsequent reference to that data
use buffer 7 time?
if your logger uses buffer 7 to store the
start time, then stored times are used.
Y = YES (use stored times)
N = NO (enter start time on keyboard)
If the program in the logger has been created by the
STARLOG
IBM
software package buffer 7 will contain the time of the first data log. This time
can be used instead of having to enter a start time manually
12
Section
3. (UN)LOAD, PLOT& COPY