Filter
Top Products
Field Test Unit
Software
LOAD - Example 2
The following example
shows
how
to load
a
logger
with a log program stored
in RAM. It assumes the logger program was written by the UNIDATA IBM
software package and loaded into the ram
file
“FILE”,“D”
as shown in
LOAD
-
Example 1.
input from Keyboard
input from File; or
Create a command file?
K Input from keyboard
PLot, PRint, Load or
Unload
Cassette or Ram file
INPUT file?
Enter Input
file
name,type
set logger time?
Format,
Pointers &
buffer,
or Done?
B,L,C?
Format,
Pointers &
bu
ffer,
or Done?
B,L,C?
Format,
Pointers & buffer,
or
Done?
B,L,C?
Format,
Pointers
& buffer,
or
Done?
B,L,C?
Format,
Pointers
&
buffer,
or Done?
L
Load logger [PLOT
or PLOTX only]
R Logger program is contained in RAM
FILE
Program
name is FILE,D
N Do
not
alter the loggers cycle counter.
F Specify
Load logger
with a
set of block location counts
0,50,14 Load Program control variables
F Specify Load logger with a
set of block location counts
1,0,7 Load Buffer 0 poin
ters
F Specify Load logger with a
set of block
location
counts
1,112,7 Load Buffer 7 pointers
F Specify Load logger with a
set of block location counts
1,128,512
Load Logger program. Notice
that in
this case the last byte of the logger
program given
by
PDLASEM would
be 896.
D Finished
20 Section 3. (UN)LOAD, PLOT& COPY