Filter
Top Products
Field
Test
Unit
Software
compatibles). If you require to use PDLIO you must purchase that
package separately.
g) copy data files and command files between cassette, RAM and the
RS-232 communication channel (host computer).
h)
save frequently used (Un)load/Plot operator responses into com-
mand files in RAM or on cassette.
3.2 COMMAND
FILES
Once the format of the (un)load or print/plot output has been decided, the
operator commands (entered into the keyboard in response to the questions
listed below) may be saved in a RAM file or on cassette.
This feature saves the operator entering
all
the responses every time a plot
or unload is performed. Instead, the operator simply enters in the command
file name and the (un)load or print/plot proceeds automatically using the
pre-saved operator commands from that command file.
Many command files may be created and saved, allowing command files for
a variety of loading, unloading, printing or plotting operations.
3.3 COPY(ING) FILES
The “COPY” program allows data files or command files to be transferred
to/from RAM/cassette or to/from FTU and a host computer. These
files
must be standard BASIC files in ASCII format (lines terminated with a car-
riage return and
less
than
255
characters in length).
3.3.1 Running COPY
1.
Connect datacassette and/or RS-232 link to FTU
2.
Type:- RUN “COPY” then press Return
3. Answer the following questions:
Section 3. (UN)LOAD, PLOT & COPY
9