Filter
Top Products
Advanced Guide
>
About Network Communication
>
Changing and Confirming Network Settings
> Printing Out Network
Setting Information
Printing Out Network Setting Information
You can print out the network settings of the machine such as its IP address and SSID.
Important
This print out contains valuable information about your computer. Handle it with care.
1.
Make sure that the machine is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the Cassette.
3.
Select
Settings on the
HOME
screen, then press the
OK
button.
4.
Select
Device settings, then press the
OK
button.
5.
Select LAN settings, then press the
OK
button.
6.
Select Confirm LAN settings, then press the
OK
button.
7.
Select Print LAN details, then press the
OK
button.
8.
Select Yes, then press the
OK
button.
The following information on the machine's network setting is printed out.
Item
Explanations of the item Setting
Wireless LAN Wireless LAN
Enable/Disable
Link Status
Status of the Wireless LAN
Active/Inactive
MAC Address MAC Address
XX:XX:XX:XX:XX:XX
SSID SSID
SSID of the wireless LAN
Connection Mode Connection Mode Infrastructure
Channel Channel
XX (1 to 13)
Encryption
Method of the Encryption none/WEP/TKIP/AES
WEP Key Length WEP Key Length
Inactive/128/64
Authentication
Method of the Authentication auto/open/shared/WPA-PSK/WPA2-PSK
Signal Strength Signal Strength
0 to 100 [%]
TCP/IP Version TCP/IP Version
IPv4/IPv6
IP Address Selected IP Address
XXX.XXX.XXX.XXX
Default Gateway Default Gateway
XXX.XXX.XXX.XXX
Subnet Mask*1
Subnet Mask
XXX.XXX.XXX.XXX
Subnet Prefix
Length*2
Subnet Prefix Length
XXX
IPsec*3
IPsec setting
Active
Security Protocol*3
Method of the Security Protocol
ESP/ESP & AH/AH
Wired LAN Wired LAN
Enable/Disable
Page 950 of 988 pagesPrinting Out Network Setting Information