Filter
Top Products
16 Installing the Scanner
Installing the Scanner
Installation Requirements
In order to use the DR-5010C, your computer must satisfy the following
system requirements:
• A computer that meets the following specifications:
- CPU: Pentium 4 (1.5 GHz or higher)
- Memory: 512 MB or more (1 GB or more recommended)
- Hard disk: 1 GB or more available space
- CD-ROM drive
- SCSI board or Hi-Speed USB 2.0 interface
- Monitor: Resolution of 1024 x 768 (XGA) or better recommended
• SCSI board or USB 2.0 interface board that supports the scanner (See
“Interface Cards,” on p. 19.)
• Hi-Speed 2.0 interface equipped with your PC or Hi-Speed 2.0 interface
board compatible with your scanner
• One of the following operating systems:
Connecting via SCSI
- Microsoft Windows 98 SE
- Microsoft Windows Me
- Microsoft Windows NT 4.0 Workstation SP6
- Microsoft Windows 2000 Professional SP3 or later
- Microsoft Windows XP Professional SP1 or later
- Microsoft Windows XP Home Edition SP1 or later
Connecting via USB 2.0
- Microsoft Windows 98 SE
- Microsoft Windows Me
- Microsoft Windows 2000 Professional SP3 or later
- Microsoft Windows XP Professional SP1 or later
- Microsoft Windows XP Home Edition SP1 or later
• ISIS compatible or TWAIN compatible application software that runs on
your operating system
IMPORTANT
• USB connection is not supported on Windows NT. Connect the scanner via
a SCSI cable to use it with a Windows NT system.
• If the Hi-Speed USB 2.0 interface is standard equipment on your computer,
then all computer operations are not guaranteed. If the standard Hi-Speed
USB 2.0 interface does not operate normally sometimes, then use the
recommended Hi-Speed USB 2.0 interface card. Contact your local
authorized Canon dealer or service representative for more detailed
information.