Canon SX6000 Projector User Manual


 
13
Safety Instructions
Safety Instructions
Safety Precautions
WARNING:
THIS APPARATUS MUST BE GROUNDED.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
This projector produces intense light from the projection lens. Do not stare directly into
the lens, otherwise eye damage could result. Be especially careful that children do not
stare directly into the beam.
Install the projector in a proper position. Otherwise it may result in a fire hazard.
Allowing the proper amount of space on the top, sides, and rear of the projector cabinet
is critical for proper air circulation and cooling of the unit. The diagrams shown here
indicates the minimum space required. If the projector is to be built into a compartment
or similarly enclosed, these minimum distances must be maintained.
Do not cover the ventilation slots on the projector. Heat build-up can reduce the service
life of your projector, and can also be dangerous.
If the projector is unused for an extended time, unplug the projector from the power out-
let.
Do not project the same image for a long time.
An afterimage may remain on the LCD panels due to the characteristics of the panels of
the projector.
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the ceiling, clean the air intake vents and top of the pro-
jector periodically with a vacuum cleaner. If you leave the projector unclean for a long
time, the cooling fans can be clogged with dust, and it may cause a breakdown or a
disaster.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH
AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PROJEC-
TOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIO-
RATED.
SIDE and TOP REAR
50 cm (1.6')
50 cm (1.6')
50 cm (1.6')
50 cm (1.6')