Filter
Top Products
Setting Up the Network
184
■Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings window, you can configure the settings for authentica-
tion of mail that is sent when an error occurs. For the setting procedure, refer to page
177.
Item Explanation
Factory default set-
ting
Mail authentication Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.
OFF
User name Enter the user name to use for mail
authentication in 1-byte alphanu-
meric characters and symbols (1 - 63
characters).
<Blank>
Password Enter the password for mail authenti-
cation in 1-byte alphanumeric charac-
ters and symbols (1 - 63 characters).
<Blank>
Confirm password For confirmation, enter the same
password as you entered in [Pass-
word].
<Blank>
POP3 server IP address Enter the POP3 server IP address in
1-byte numbers.
0.0.0.0
POP3 server port number Enter the POP3 server port number in
1-byte numbers (1 - 65535).
110
POP before SMTP response time Enter the wait time from POP3 authen-
tication to SMTP authentication (units:
milliseconds) using 1-byte numbers
(0 - 9999 milliseconds).
300