Filter
Top Products
177
Installation Manual Connecting to a Networ
k
Configuring the Network From the Computer
■Displaying and Configuring the Network Configuration Screen
The web browser screen shown below is for the WUX4000.
1 Turn on the computer and projector.
2 Launch a web browser, enter “http://(projector IP address)” in the address bar, and
press the Enter key.
The password input screen appears.
3 Enter the user name and password on the password input screen, then click OK.
The factory default user name is “root” and the password is “system”.
The projector web screen appears in the web browser.
The factory default IP address is “192.168.254.254”. If DHCP settings are used, ask the net-
work administrator for the projector IP address. It is possible to check the IP address from
the projector menu.