Filter
Top Products
Part Names
38
Side Control
(1) LED indicators (P39)
The projector status is shown by the LED indicators (off / on / flashing).
For indicator status, refer to page 39.
(2) POWER button (P56, P80)
Turns the projector on or off.
(3) MENU button (P88, P89)
Displays a menu on the screen.
(4) LENS button
Each time the button is pressed, the
screen changes to focus adjustment
(P73), zoom (image size) adjustment
(P71), or lens shift (image position)
adjustment (P74). To adjust, use the
[] / [] or the [] / [] buttons.
(5) INPUT button (P60)
Switches the input signal.
(6) Pointer / VOL buttons (P90)
Adjust the sound volume.
[ ] button: Decreases the volume.
[ ] button: Increases the volume.
Selects the upper, lower, left or right
item in the menu.
(7) OK button (P92)
Determines the item selected from the
menu.
• POWER ON (green): Lights up or flashes when the power is on.
• STAND BY (red) : Lights up or flashes during standby or when the projector is
shut down.
• WARNING (red) : Lights up or flashes when an error occurs.
• LAMP (orange) : Flashes when the time for replacing the lamp is near. When a
lamp cover error occurs, the [WARNING] indicator will also
flash. When a lamp error occurs, it will illuminate at the same
time as the [WARNING] indicator.
• TEMP (red) : When the temperature inside the projector is high, it will flash. If
the temperature inside the projector increases further and a
temperature error occurs, it will illuminate at the same time that
the [WARNING] indicator illuminates.
(1)
(2)
(3)
(4)
(5)
(7)
(6)