Filter
Top Products
182
Setting Up the Network
■Setting Basic Information [Network]
From [Network] in the settings window, you can log into the web screen and set basic
network information. For the setting procedure, refer to page 177.
Item Explanation Factory default setting
Password
User name When logging into the web screen,
enter the user name in 1-byte
alphanumeric characters and
symbols (4 -15 characters).
root
New password When logging into the web screen,
enter the password in 1-byte
alphanumeric characters and
symbols (4 -15 characters).
system
Confirm new password For confirmation, enter the same
password that you entered in [New
password].
system
TCP/IP
DHCP Select whether to turn the DHCP
function on or off. If the function is
on, because the IP address is
acquired from the server, it is not
possible to enter the [IP address],
[Subnet mask], and [Default gate-
way].
OFF
IP address Enter the IP address of the projec-
tor in 1-byte numbers.
192.168.254.254
Subnet mask Enter the subnet mask in 1-byte
numbers.
255.255.255.0
Default gateway Enter the default gateway IP
address in 1-byte numbers.
0.0.0.0
If settings related to TCP / IP were changed, it is necessary to disconnect and reconnect to
the network. If the network subnet mask was changed, select [Subnet mask] in the above
window and set the new subnet mask.