Filter
Top Products
Menu Description
128
Basic Wireless Network Settings [Wireless]
From [Wireless] on the settings screen, you can complete basic network
information for wireless connections. For the setting procedure, refer to “Network
Setting” (P124).
Item Explanation Factory default setting
MAC address Shows the projector’s wireless MAC
address.
The projector’s wireless
MAC address
DHCP Select whether to turn the DHCP
function on or off for wireless
connections. If the function is on,
because the IP address is acquired
from the server, it is not possible to
enter the [IP address], [Subnet mask],
and [Default gateway].
OFF
IP address Enter the projector’s wireless IP
address in 1-byte numbers.
192.168.253.254
Subnet mask Enter the wireless subnet mask in 1-
byte numbers.
255.255.255.0
Default gateway Enter the wireless default gateway IP
address in 1-byte numbers.
0.0.0.0
Wi-Fi Protected Setup Select a simple method of establishing
a wireless connection.
None (configure
manually)
Mode Select the wireless connection mode. infrastructure mode
Select SSID Select the wireless access point’s SSID.
Click the [Refresh] button to update the
list. If the SSID is not listed, enter it in
single-byte alphanumeric characters (1-
32 characters).
<Blank>
Security Select the wireless security setting. Open
Channel Shows the wireless channel number.
When [Mode] is set to projector access
point (PJ AP) mode, a channel can be
selected.
1