Filter
Top Products
Maintenance
160
Replacing the Air Filter
Follow the procedure below when replacing the air filter.
1 Turn off the projector power and remove the power plug.
2 As you press the top and bottom
of the air filter cover to release
the lock, remove the cover.
3 Open the filter cover and remove
it.
4 Remove the air filter.
5 Follow this procedure in reverse
to install a new air filter.
• Handle the air filter carefully. If damaged, the air filter will not work properly.
• We recommend cleaning or replacing the air filter (part no: RS-FL02) when you replace
the lamp.
• Contact the Canon Customer Support Center for further information.
• Replacement air filter part number: RS-FL02
• This can also be purchased from the Canon website.