Filter
Top Products
129
Menu Description
Advanced Guide Menu Description
Specifying Networked Multi-Projection Settings [NMPJ Password]
From [NMPJ Password] in the settings screen, you can specify the items needed
for NMPJ authentication. For the setting procedure, refer to “Network Setting”
(P124).
Key ID Select the wireless WEP key ID. 1
Key type Select the wireless security key input
type.
ASCII
Key Enter the wireless security key. <Blank>
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network. If the network subnet mask was changed, select [Subnet mask] in the above
screen and set the new subnet mask.
Item Explanation Factory default setting
Password Enter the password required for a
networked multi-projection connection
in single-byte alphanumeric characters
(0-15 characters).
<Blank>
Confirm password For confirmation, enter the same
password as you entered in [Password].
<Blank>
For details on Networked Multi-Projection (NMPJ), refer to the NMPJ user’s manual.
Item Explanation Factory default setting