Canon WUX500 Projector User Manual


 
131
Menu Description
Advanced Guide Menu Description
Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings screen, you can configure the settings for
authentication of mail that is sent when an error occurs. For the setting procedure,
refer to “Network Setting” (P124).
Item Explanation Factory default setting
Mail authentication Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.
OFF
User name
Enter the user name to use for mail
authentication in 1-byte alphanumeric
characters and symbols (1 - 63
characters).
<Blank>
Password
Enter the password for mail
authentication in 1-byte alphanumeric
characters and symbols (1 - 63
characters).
<Blank>
Confirm password For confirmation, enter the same
password as you entered in
[Password].
<Blank>
POP3 server IP
address
Enter the POP3 server IP address in 1-
byte numbers.
0.0.0.0
POP3 server port
number
Enter the POP3 server port number in
1-byte numbers (1 - 65535).
110
POP before SMTP
response time
Enter the SMTP authentication timeout
period after POP3 authentication (unit:
milliseconds) using 1-byte numbers (0 -
9999 milliseconds).
300