Filter
Top Products
E
62
Error Messages
LOW BATTERY!
CONTINUE TO
PRINT? SET/ESC
LOW BATTERY!
DATA ERROR!
INITIALIZE THE
PRINTER!
PRINT ERROR!
LOAD AN INK
RIBBON CAS-
SETTE!
PRINT ERROR!
NO INK RIBBON!
NOT ENOUGH INK
RIBBON FOR
NEXT PRINT
PRINT ERROR!
LOAD A DISC
INTO THE
PRINTER!
NO DATA!
Battery power is low.
➔ Replace batteries as soon as possible.
Battery power is low.
➔ Replace batteries as soon as possible.
You are attempting to use the printer without
initializing its memory.
➔ Initialize memory immediately.
You are attempting to print without an ink ribbon
cassette loaded in the printer, or the cassette is not
loaded correctly.
➔ Correctly load the ink ribbon cassette.
The loaded ink ribbon cassette has reached its end.
➔ Replace it with another ink ribbon cassette.
There is not enough ink ribbon to completely print
the label you are trying to print.
➔ Replace it with another ink ribbon cassette.
You are attempting to print without a disc on the disc
tray.
➔ Correctly place a disc onto the tray.
You are attempting to recall, edit, or delete a preset
phrase memory that does not contain any data.
➔ Select the correct preset phrase memory.
You are attempting to recall or delete stored label data
when none exists.
➔ Save label data before trying to recall it.
Message Cause and Recommended Action
Message Cause and Recommended Action
ENTIRE PHRASE
COULD NOT BE
RECALLED!
NO INPUT TEXT!
SAME NAME
ALREADY USED!
LINK ERROR!
CHECK ALL
CONNECTIONS!
MEMORY FULL!
The number of characters in the preset phrase you
recalled will cause the number of allowable
characters to be exceeded. In this case, the phrase
will be recalled only up to the allowable number of
characters.
➔You can use the recalled characters, or reduce the
number of characters in the label in order to allow
recall of the entire preset phrase.
The label you are attempting to print or preview does
not contain any input text.
➔ Select a different label or input text.
The name you are trying to use to save a label is
already used for an existing label in memory.
➔ Use a different name.
Data could not be received from the connected
computer.
➔Check all connections and make sure you are
performing the required operations correctly.
There is not enough memory to store the data you
are trying to save.
➔Delete some of the data from memory to make
room from the new data.