55
E
Message
See page:
Cause and Action
PRINT ERROR!
CHECK THE TAPE
CARTRIDGE!
THIS IS THE WRONG
TYPE OF TAPE
CARTRIDGE!
• You are using magnetic tape
and the cut mode is CONT
HALF CUT, FULL+HALF
CUT, or FULL CUT.
➜
Change the cut mode to
UNCUT before printing.
* If the steps described above
do not clear the error
message, contact your
retailer or your nearest
CASIO service center.
• The cassette cover is not
closed completely.
➜
Close the cassette cover.
• The label you are trying to
print or recall is not compat-
ible with the currently loaded
tape cartridge.
➜
Turn off the printer and
replace the tape cartridge.
• You replaced the tape
cartridge while the printer
was turned on.
➜
Turn off the printer and
replace the tape cartridge.
20
13
• Pasting copied text will cause
the number of characters to
exceed the allowable limit for
the location where you are
pasting.
➜
Re-input so the pasted text
does not cause the allowable
number of characters to be
exceeded.
• Printing with a frame will
cause your label to have
more than the allowable
number of lines.
➜
Decrease the number of
lines or change to a wider
tape.
• You are trying to print a label
that has more than the
allowable number of lines.
➜
Decrease the number of
lines or change to a wider
tape.
Message
See page:
Cause and Action
TOO MANY
CHARACTERS!
SOME WERE NOT
PASTED
TOO MANY LINES TO
FRAME!
TOO MANY LINES!
40
34
28