Filter
Top Products
20
This section explains how to configure advanced settings for a wireless LAN connection
between the Data Projector and a computer.
Web Setup
In order to modify the settings of a Data Projector manual setup profile and to configure
advanced settings of other Data Projector settings, you need first to display a special web
browser page named “Web Setup” on you computer screen. To display Web Setup, use a
web browser running on a computer that is connected to the Data Projector over a
wireless LAN.
To display and log into the Web Setup page
1
Establish a wireless LAN connection between a computer and the Data Projector.
z For information about connection procedures, see “Using a Simple Connection Profile for
a Wireless LAN Connection between the Data Projector and a Single Computer” (page 9)
and “Using a Manual Connection Profile for Wireless LAN Connection between the Data
Projector and One or More Computers” (page 11).
z If a wireless LAN connection is already established between the computer and the Data
Projector, proceed to step 2.
2
On the Wireless Connection 2 window of the computer, click the button.
z This will start up the computer’s default browser and display an initial page like the one
shown below.
z The Web Setup page may not appear if your browser is running already. In this case,
quit the browser and then click the button again.
Advanced Wireless LAN Connection Settings