Filter
Top Products
26
Assigning a Name to a Data Projector
You can use Web Setup to assign a unique name to each Data Projector, which comes in
handy when you are using multiple projectors. The projector name you assign is displayed
in the following locations.
• In the “Projector Name” box of the Wireless “Standing by for connection...” message
• In the “Projector Name” box of the Wireless connection information window (page 23)
• In the “Projector Name” box of the Wireless Connection 2 window (pages 10, 13)
• In the “Projector Name” box of the Connection dialog box (pages 13, 16)
To assign a name to a Data Projector
1
Perform the procedure under “To display and log into the Web Setup page”
(page 20) to display the Web Setup top page.
2
In the “Projector Setup” area, click the [Edit] button.
z This will display a projector setup page.
3
Enter up to 12 characters for the name into the “Projector Name” box.
4
Click the [Save] button.
Note
You also can use the projector setup page to define a connection keyword (page 27).