Filter
Top Products
9
The following procedure uses the preset Simple Connection 1 connection profile to
establish a wireless LAN connection between the Data Projector and a single computer for
the first time.
To establish a wireless LAN connection between a single computer and the
Data Projector
1
Turn on the Data Projector.
z Wait until the Data Projector’s POWER/STANDBY indicator is lit green.
2
Connect the CASIO YW-2 wireless adapter to the Data Projector’s USB port.
z You also can connect the wireless adapter to the Data Projector before turning on the
Data Projector.
z The Data Projector will detect the wireless adapter and start up its Wireless function
automatically. The message shown below will appear in the projection area.
3
Turn on your computer and start up Windows.
4
On your computer, start up Wireless Connection 2.
z If your computer is running Windows Vista, starting up Wireless Connection 2 will cause
the “User Account Control” message to appear. When it does, click “Allow”.
z If the “Select Network” dialog box like the one shown below appears, click the wireless
LAN adapter you want to use for connection with the Data Projector and then click the
[OK] button.
z If your computer is running Windows XP or 2000, do not select the “Connect to an
existing network” check box.
Using a Simple Connection Profile for a Wireless
LAN Connection between the Data Projector and a
Single Computer
Check to make sure that “Simple Connection 1”
is shown.