Filter
Top Products
53
To turn display of user names in the projection area on and off
Note
Under initial default settings, the user name is displayed in the upper left corner of the
projection area whenever you switch projection from the contents of one computer
screen to another, or when a single computer is connected to the Data Projector over
a wireless LAN.
1
While Wireless is shown in the projection area, press the [MENU] key on the
Data Projector’s remote controller.
z This will display the setup menu.
2
Press the [T] key to move the highlighting to “USB” and then press the
[ENTER] key.
3
Press the [T] key once to move the highlighting to “Setup” and then press the
[ENTER] key.
z This will display the Wireless setup menu.
4
Press the [T] key to move the highlighting to “Show User Name Display”.
5
Use [X] and [W] to select “On” (user name displayed) or “Off” (user name not
displayed).
6
To exit the Wireless setup menu, press the [ESC] key.