Filter
Top Products
1
2
Chapter 2 Getting Started
8
Connecting the Interface Cable
1. Insert the cable's connector into the interface connector.
Align the top and bottom of the male and female connectors and connect the two
connectors.
2. Fastening the Cable Terminals
Fastening the Serial Interface Connector:
After making sure the connector is inserted fully, tighten the screws to fasten the con-
nector in place.
• Use screws which can be tightened by hand to fasten the connector to the interface.
Fastening the Parallel Interface Connector:
After making sure the connector is inserted fully, turn the wire clamps in the arrow
direction to fasten the connector in place.
3. Connecting the Cable to the Computer Terminal.
Be sure to turn off the power to the computer first, then make connections.