Filter
Top Products
7
73
• If there is a fraction as a result of calculations, interpolation is carried out at the
mechanism's minimum pitch. Remainders are cut off.
• The basic calculation pitch (x) is used in calculating the horizontal starting point
and the horizontal length and the basic calculation pitch (y) is used in calculating
the vertical starting point and the vertical length.
• If X is the horizontal starting point, Y is the vertical starting point, Dx is the hori-
zontal length and Dy is the vertical length, the printing area becomes as shown in
the following diagram.
Paper
Dx
Dy
• The area which this printer can print is a 432/203 inch in the horizontal direction
and 938/203 inch in the vertical direction.
• The initial values are x1 = x2 = y1 = y2 = 0, dx1 = b0, dx2 = 01, dy1 = AA and
dy2= 03.
Printing Area
← Paper Feed Direction
Input Data Format
(X+Dx–1, Y+Dy–1)
(X, Y)
→
→