Filter
Top Products
4
23
Operation Panel Keys
Entering Configuration Mode
Select YES (R) or NO (J) to the printed question and set it.
If YES: Press the RECEIPT key.
If NO: Press the JOURNAL key.
• Perform the operation with the front cover removed.
1. With roll paper set, switch the power on while pressing
both the RECEIPT key and the JOURNAL key.
This causes the printer to enter the printer configuration setting mode, and the printer
will print the following text in accordance with the selected menu for each item.
1. Prints the ROM version and the date.
2. If YES is selected, it resets the factory default
settings, then moves to the following line.
If NO is selected, the following line is printed.
3. If YES is selected, the currently set menues
are printed.
If NO is selected, the line in 5 is printed.
4. The input buffer, character settings (Interna-
tional character code) and serial protocol set-
tings are as set by the DIP switches.
5. If YES is selected, after the line in 6, printing
of the settings for each item is begun.
If NO is selected, the printing of 8 is done,
and setting of the printer ends.
6. Select NO until the menu of all the setting
items is set as desired. When the content is
correct, select YES. If YES is selected, the
setting contents are recorded in non-volatile
memory and the printer prints the next item.
When Error handshake setting item is ended,
the set contents (7) and 8 are printed, then
printer set up is ended.
2. Turn the power off, then turn it on again.
The set contents become enabled.
2
3
5
8
4
7
1
6
PRINTER SETTING MODE
YES:Push (R)eceipt Key
NO
:Push (J)ournal Key
ROM(Even):AW32-0A0A
ROM(Odd) :AW33-0A0A
ROM Date :MAY-28-1996
Reset Current Settings
To Factory Settungs?
Print Current Settings?
Current Settings
<HARDWARE SETTINGS>
:RECEIPT DENSITY
:JOURNAL DENSITY
:COVER OPEN SENSOR
:AUTO CUTTER
:AUTO LOADING
:R PAPER NEAR END
:J PAPER NEAR END
:CR CONTROL
:KANJI MODE
:RESET BY INIT
:RESET BY DSR
:ERROR HANDSHAKE
:INPUT BUFFER
<CHARACTER SETTINGS>
:CHARACTER TABLE
:COUNTRY
<SERIAL SETTINGS>
:DATA BIT
:PARITY
:PROTOCOL
:BUADRATE
Change Current Setting?
:RECEIPT DENSITY
:JOURNAL DENSITY
:COUVER OPEN SENSOR
:AUTO CUTTER
:AUTO LOADING
:R PAPER NEAR END
:J PAPER NEAR END
:CR CONTROL
:KANJI MODE
:RESET BY INIT
:RESET BY DSR
:ERROR HANDSHAKE
Current Settings
:RECEIPT DENSITY
:JOURNAL DENSITY
:COVER OPEN SENSOR
:AUTO CUTTER
:AUTO LOADING
:R PAPER NEAR END
:J PAPER NEAR END
:CR CONTROL
:KANJI MODE
:RESET BY INIT
:RESET BY DSR
:ERROR HANDSHAKE
SETTING MODE END!!
YES (R) NO (J)
YES (R) NO (J)
1/2/3/4
1/2/3/4
VALID/INVALID
VALID/INVAILD
VALID/INVALID
VALID/INVAILD
VALID/INVAILD
CR+KF/LF/IGNORE
VALID/INVALID
VALID/INVALID
VALID/INVALID
BUSY/INVALID
8KB/1LINE
PC473/PC850
JAPAN/U.S.A
FRANCE/GERMANY
U.K./DENMARK
SWEDEN/ITALY
SPAIN/NORWAY
DENMARK2/SPAIN2
LATIN/KOREA
LEGAL
8BITS/7BITS
NONE/ODD/EVEN
DTR:DSR
XON:XOFF
9600/4800
2400/19200
1
YES(R) NO(J)
1
YES(R) NO(J)
VALID
YES(R) NO(J)
VALID
YES(R) NO(J)
VALID
YES(R) NO(J)
INVALID
YES(R) NO(J)
INVALID
YES(R) NO(J)
CR+LF
YES(R) NO(J)
INVALID
YES(R) NO(J)
VALID
YES(R) NO(J)
VALID
YES(R) NO(J)
BUSY
YES(R) NO(J)
YES(R) NO(J)
T1/2/3/4
1/2/3/4
VALID/INVALID
VALID/INVALID
VALID/INVALID
VALID/INVALID
VALID/INVALID
CR+LF/LF/IGNORE
VALID/INVALID
VALID/INVALID
VALID/INVALID
BUSY/INVALID