Filter
Top Products
7
Chapter 7 Print Control Codes
70
(28) Selecting the standard mode (ESC S)
Code: [1B] h + [53] h
This command switches the printer from the Page mode to the Standard mode.
• This command is valid only when input in the Page mode.
• Data developed in the Page mode are erased.
• The top of the line is made the next printing position.
• The printing area set by ESC W is initialized.
• The values set in the following commands which are set independently in the Page
mode and the Standard mode, respectively, are switched to the values set in the
Page mode.
(1) Space amount setting ESC SP, FS S
(2) Line feed amount setting ESC 2, ESC 3