Filter
Top Products
7
Chapter 7 Print Control Codes
52
Bit Function 0 1
0 Not used Fixed at 0
1 Not used Fixed at 1
2 Status of drawer pint No. 3 “L” “H”
3 On-line/Offline On-line Off-line
4 Not used Fixed at 1
5 Not defined — —
6 Not defined — —
7 Not used Fixed at 0
Bit Function
Value
01
0 Not used Fixed at 0
1 Not used Fixed at 1
2 Cover Open
Cover Cover
Closed Closed
3 Paper Feed by paper feed switch
No paper Paper feed
feed in progress
4 Not used Fixed at 1
5 Printing not stopped by No Paper
No stopped
Stopped
6 Error generated None Error exists
7 Not used Fixed at 0
Bit 5: When the roll paper end sensor signals that there is no paper, or when there is
no paper when the roll paper near end sensor is enabled by ESC c 4, printing is stopped.
At this time, bit 5 = 1.
(1) Printer Status (when n=1 is specified)
(2) Off-line Factor Status (when n = 2 is specified)