Filter
Top Products
6
41
Drawer Kick Connector
Specifications
Drawer Kick Drive Signal
Outputs a pulse signal specified by the ESCp command. Also, the status of SW (+) can be
known from pin 34 of the interface connector in the case of the parallel interface and by the
GSr, for instance command in the case of the serial interface.
Electrical Characteristics
Drive Voltage: DC 24 V
Drive Current: Max. 0.8 A (should be within 510 ms)
SW Signal: Signal level “L”= 0~0.5 V
“H”= 3~5 V
Drawer Kick Connector