Filter
Top Products
4
Chapter 4 Using the Printer
22
Operation Panel Keys
Use the RECEIPT key and JOURNAL key, in accordance with the query printing system,
to set the printer internally.
Items which can be set are as follows.
• Receipt print density.
Adjusts the receipt print density. (See the table below.)
• Journal print density.
Adjusts the journal print density. (See the table below.)
• Cover Open
Sets the cover sensor on enabled or disabled.
• Auto Cutter
Sets the auto cutter on enabled or disabled.
• Auto Loading
Sets the auto loading function on enabled or disabled for setting roll paper.
• Receipt Paper Near End
Sets the print stop function on enabled or disabled in response to signals from the
receipt paper near end sensor.
• Journal Paper Near End
Sets the print stop function on enabled or disabled in response to signals from the
journal paper near end sensor.
• CR Operation
Sets CR+LF / LF / Disregard.
• Reset by DSR
Sets enabling or disabling of reset by the serial interface DSR signal.
• Reset by INIT
Sets enabling or disabling of reset by the serial interface INIT signal.
• Error Handshake
Sets whether the interface is changed to the BUSYstate when a printer error occurs.
* Relationship between each specified paper and print density (Use this as a standard.)
Print Density Level Paper Condition
1 TF50KS-E2c, F220vp. Light
2
3 PD160R, PD160R-N
4 Dark