Ciprico Rimfire 3880 Network Card User Manual


 
User’s Guide 21020285 D
Chapter 7 Board-control Commands
Identify (05H) Page 7 - 11
Option Flags
The Options field of the Identify command Status Block has the following
format:
RST Reset Jumper - Indicates whether the SCSI bus will be reset at power-
up and when adapter is reset through the reset port.
0 SCSI bus will not be reset.
1 SCSI bus will be reset.
SCSI ID BITS SCSI ID of Adapter - Indicates the current SCSI bus ID of
the RF3880 adapter.
0 Bit of ID not set.
1 Bit of ID set.
Day, Month, Year
These three fields, when combined, indicate the date (in hex) that the firmware
in the EPROM was compiled for production.
Firmware Number of Even EPROM
There is a set of two EPROMs on the board. This number is the Firmware
number of the EVEN EPROM.
BITS
76543210
SCSI ID 2 SCSI ID 1 SCSI ID 0 RST 0 1 0 SCSI ID3
Table 66: Option Flags Field - Identify Status Block
SCSI ID
Option Flags Bits
0765
00000
10001
20010
30011
40100
50101
60110
70111
81000
91001
101010
111011
121100
131101
141110
151111
Table 67: Adapter SCSI ID Bits