21020285 D User’s Guide
Appendix D Defaults
Page D - 2 Introduction
Introduction
Each Rimfire 3880 is shipped with the same factory settings. If you change
nothing when you receive your board, it will power-up with the defaults that
are listed in this appendix.
Summary
This appendix provides information on the following:
• Hardware defaults as shipped from the factory.
• Firmware defined defaults for these Board-control commands: Identify,
General Options, Unit Options and Extended Unit Options, and Board
Information.
This appendix is helpful when you wish to know the values the RF3880 will
assume if you do not change an option.