Ciprico Rimfire 3880 Network Card User Manual


 
21020285 D User’s Guide
Chapter 7 Board-control Commands
Page 7 - 14 Board Statistics (06H)
Statistics Data
Structure
The Statistics Data Structure returned from a Board Statistics command will
have this format:
Description of
Fields
The Board Statistics Data Structure returned from the Board Statistics
command contains these fields:
Total Commands Processed
This field reports the number of commands, Pass-through and Board-control,
that have been processed by the adapter since power-up or since the CLR option
has been used.
Total SCSI Commands issued to an ID
Each of these fields reports the number of commands the adapter has issued to
the respective SCSI ID.
Number of SCSI Check Condition Status Received
This field reports the number of times a SCSI device reported a Check
Condition status.
Target Mode Selection Count
Number of times the adapter was selected as a target device.
Address
Offset
Byte Memory Address
Offset + 0 Offset + 1 Offset + 2 Offset + 3
00H Total Command Processed
04H Total SCSI Commands Issued to ID 0
08H Total SCSI Commands Issued to ID 1
0CH Total SCSI Commands Issued to ID 2
10H Total SCSI Commands Issued to ID 3
14H Total SCSI Commands Issued to ID 4
18H Total SCSI Commands Issued to ID 5
1CH Total SCSI Commands Issued to ID 6
20H Total SCSI Commands Issued to ID 7
24H Number of Times SCSI Check Conditions Status Received
28H Total SCSI Commands Issued to ID 8
2CH Total SCSI Commands Issued to ID 9
30H Total SCSI Commands Issued to ID 10
34H Total SCSI Commands Issued to ID 11
38H Total SCSI Commands Issued to ID 12
3CH Total SCSI Commands Issued to ID 13
40H Total SCSI Commands Issued to ID 14
44H Total SCSI Commands Issued to ID 15
48H Target Mode Selection Count
4CH
thru
58H
Reserved
Table 70: Board Statistics Data Structure