Filter
Top Products
2-2
Book Title
78-13113-06 B0
Chapter 2 Preparing for Installation
Software Requirements
Software Requirements
The DPT uplink card is compatible with the following router system software:
• Cisco IOS Release 12.0(19)SP or later releases of Cisco IOS 12.0 SP
• Cisco IOS Release 12.0(22)S or later releases of Cisco IOS 12.0 S
The POS/DPT uplink card is compatible with the following router system software:
• Cisco IOS Release 12.0(21)SP or later releases of Cisco IOS 12.0 SP
• Cisco IOS Release 12.0(23)S or later releases of Cisco IOS 12.0 S
The RPR/SRP uplink card is compatible with the following router system software:
• Cisco IOS Release 12.0(29)S1 or later releases of Cisco IOS 12.0 S
The console/auxiliary card is compatible with the following router system software:
• Cisco IOS Release 12.0(21)SP or later releases of Cisco IOS 12.0 SP
• Cisco IOS Release 12.0(22)S or later releases of Cisco IOS 12.0 S
Use the show version command to display the system software release that is currently loaded and
running.
In the following example of the show version command, the running system software is Cisco IOS
Release 12.0(19)SP,
as displayed in italic print:
Router# show version
Cisco Internetwork Operating System Software
IOS (tm) 10700 Software (C10700-P-M), Version 12.0(19)SP, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
TAC Support:http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Fri 28-Sep-01 11:44 by srani
Image text-base:0x50010960, data-base:0x50660000
ROM:System Bootstrap, Version 12.0(20010529:144545) [yuwang-rommon1 149], DEVELOPMENT
SOFTWARE
BOOTLDR:10700 Software (C10700-P-M), Version 12.0(19)SP, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc1)
Router uptime is 10 minutes
System returned to ROM by power-on
Running default software
cisco C10720 (R5000) processor (revision 0xFF) with 256000K/6144K bytes of memory.
R527x CPU at 200Mhz, Implementation 40, Rev 10.0
Last reset from power-on
Toaster processor tmc0 is running.
Toaster processor tmc1 is running.
1 one-port OC48 SONET based SRP controller.
1 24 Port 100 Mbps Fast Ethernet TX controller.
24 FastEthernet/IEEE 802.3 interface(s)
1 SRP network interface(s)
509K bytes of non-volatile configuration memory.
16384K bytes of Flash internal SIMM (Sector size 512KB).
49152K bytes of Flash internal SIMM (Sector size 512KB).
Configuration register is 0x2102