Cisco Systems CISCO10720 Network Router User Manual


 
5-13
Book Title
78-13113-06 B0
Chapter 5 Troubleshooting the Uplink Cards
Troubleshooting the Uplink Cards Installation
SRP1/1 wrapped on side
B (side A Self Detect
Wait to Restore [WTR])
Wrap cleared, node initiated
Wait to Restore (WTR) state
WTR period is 10 to 360 seconds (user
configured), node will unwrap at end of
WTR. None.
SRP1/1 wrapped on side
B (side A Span Neighbor
Forced Switch)
Neighbor node Forced Switch
initiated by user; Node wrap to
protect failed span
User initiated, none.
SRP1/1 wrapped on side
B (side A Span Neighbor
Manual Switch)
Neighbor node Manual Switch
initiated by user; Node wrap
User initiated, none.
SRP1/1 wrapped on side
B (side A Span Neighbor
Signal Fail)
Neighbor node wrapped due to
signal fail
Investigate the signal fail on neighbor
node.
SRP1/1 wrapped on side
B (side A Span Neighbor
Signal Degrade)
Neighbor node wrapped due to
signal degrade
Investigate the signal degrade on
neighbor node.
SRP1/1 wrapped on side
B (side A Span Neighbor
WTR)
Wrap cleared, node initiated
Wait to Restore state
WTR period is 10 to 360 seconds (user
configured), node will unwrap at end of
WTR. None.
SRP1/1 wrapped on side
B (side A Long Request
Forced Switch)
Neighbor node Forced Switch
initiated by user; Node wrap to
protect failed span; Secondary
problem on the short path
Investigate why the short path request
was not received.
Check other problems on the short span
as indicated on the neighbor node.
SRP1/1 wrapped on side
B (side A Long Request
Manual Switch)
Neighbor node Manual Switch
initiated by user; Node wrap to
protect failed span; Secondary
problem on the short path
Investigate why the short path request
was not received.
Check other problems on the short span
as indicated on the neighbor node.
SRP1/1 wrapped on side
B (side A Long Request
Signal Fail)
Neighbor node wrapped due to
signal fail
Investigate signal fail on neighbor node.
Investigate why the short path request
was not received.
Check other problems on the short span
as indicated on the neighbor node.
SRP1/1 wrapped on side
B (side A Long Request
Signal Degrade)
Neighbor node wrapped due to
signal degrade
Investigate signal degrade on neighbor
node. Investigate why short path request
was not received.
Check other problems on the short span
as indicated on the neighbor node.
SRP1/1 wrapped on side
B (side A Long Request
WTR)
Wrap cleared, Wait to Restore
timer expired
None.
Table 5-12 SRP Wrap Messages (continued)
Alarm Description Solution