Filter
Top Products
3-24
Book Title
78-13113-06 B0
Chapter 3 Installing and Removing the Uplink Cards
Configuring the RPR/SRP, DPT, and POS/DPT Uplink Card Interfaces
• Configuring Basic SRP Functionality, page 3-24
• Troubleshooting the Uplink Cards Installation, page 5-6
Configuring Basic POS Functionality
The basic POS configuration task for the router is explained in the Cisco IOS Software Configuration for
the Cisco 10720 Internet Router publication.
Configuring Basic IEEE 802.17 RPR Functionality
The basic RPR configuration task for the router is explained in the Cisco IOS Software Configuration
for the Cisco 10720 Internet Router publication under the sections, “Configuring an RPR-IEEE
Interface,” and “Configuring RPR-IEEE Mode on and SRP Interface.” Also see the IEEE 802.17 Resilient
Packet Ring Feature Guide.
Configuring Basic SRP Functionality
The basic SRP configuration task for the router is explained in the Cisco IOS Software Configuration for
the Cisco 10720 Internet Router publication under the section “Configuring an SRP Interface.”