Filter
Top Products
A-2
Hardware Installation Guide for Cisco Media Experience Engine 3000
OL-17000-01
Appendix A Cisco MXE 3000 Hardware Specifications
Server Specifications
Server Specifications
Table A-2 provides the server specifications for the Cisco MXE 3000 appliance.
Ta b l e A-2 Server Specifications
Specification Value
Dimension
—
Height 4.32 cm (1.70 in)
Depth 68.20 cm (26.85 in)
Width 44.80 cm (17.64 in)
Weight (maximum configuration: all hard drives,
power supplies, and processors installed)
15.20 kg (33.50 lb)
Weight (minimum configuration: one hard drive,
power supply, and processor installed)
11.79 kg (26.0 lb)
Input Requirement
1
—
Rated line voltage 90 VAC to 264 VAC
Rated input frequency 47 Hz to 63 Hz
Rated input current 6.5 A (100 VAC)
3 A (200 VAC)
Rated input power 527 W (115/230 V
RMS
)
BTUs per hour 1836 BTU (100 VAC)
1706 BTU (200 VAC)
Power Supply Output
—
Rated steady-state power 400 W (100 VAC)
400 W (200 VAC)
Maximum peak power 400 W (100 VAC)
400 W (200 VAC)
Acoustic Noise
2
—
Idle L
WA d—
6.30 B
L
pAm
—44.1dB
Operating L
WA d
—6.34 B
L
pAm
—44.4 dB
Operating 457 m/min (1,500 ft/min)
Non-operating 457 m/min (1,500 ft/min)
1. All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048 m (10,000
ft) is applicable. No direct sunlight allowed.
2. The type and number of options installed can limit the upper limit.
3. System performance may be reduced if operating with a fan fault above 30ºC (86ºF).
Table A-1 Environmental Specifications