Filter
Top Products
Contents
iv
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 MCU Release 5.1
OL-11899-01
CHAPTER
2 Installing the Cisco Unified Videoconferencing 3545 MCU 2-1
Physical Description of the Cisco Unified Videoconferencing 3545 MCU and EMP Modules 2-2
Physical Description of the Cisco Unified Videoconferencing 3545 MCU Module 2-2
Physical Description of the Cisco Unified Videoconferencing 3545 EMP Module 2-2
Preparing to Install the 3545 MCU 2-3
Verifying the Package Contents of the 3545 MCU 2-4
Mounting the Cisco Unified Videoconferencing 3545 Chassis in a 19-inch Rack 2-4
Installing the 3545 MCU and EMP 2-5
Removing the 3545 MCU and EMP 2-7
Initial 3545 MCU Configuration 2-8
Connecting to a PC 2-8
Setting the IP Address 2-8
Setting Ethernet Speed and Duplex Parameters 2-10
Setting a TFTP Server 2-11
Changing the Global User Name and Password 2-12
Connecting the Cisco Unified Videoconferencing 3545 MCU to the LAN 2-13
Upgrading Cisco Unified Videoconferencing 3545 MCU Software 2-13
Initial 3545 EMP Configuration 2-13
Accessing the Cisco Unified Videoconferencing 3545 EMP Main Menu 2-13
Setting the IP Address 2-14
Changing the Configuration Software Password 2-15
Changing the Security Level 2-15
Pointing the EMP to the Controlling MCU 2-16
Changing Advanced Configuration Settings 2-16
Saving Network Configuration Settings 2-17
Connecting the EMP to the LAN 2-17
Accessing the 3545 MCU Administrator Interface 2-18
Using the 3545 MCU Setup Wizard 2-19
Registering the Online Help for the 3545 MCU 2-20
Netscape Navigator Users 2-20
CHAPTER
3 Using the Cisco Software Upgrade Utility 3-1
Introduction 3-1
Launching the Cisco Software Upgrade Utility 3-1
Upgrading Software 3-2
CHAPTER
4 Cisco Unified Videoconferencing 3545 MCU Cable Connections and Pin-outs 4-1
Unit RS-232 9-Pin Serial Port on the 3545 MCU 4-1