Filter
Top Products
2-20
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 MCU Release 5.1
OL-11899-01
Chapter 2 Installing the Cisco Unified Videoconferencing 3545 MCU
Registering the Online Help for the 3545 MCU
Registering the Online Help for the 3545 MCU
The online help files for the MCU Administrator and Conference Control interfaces are shipped on the
Cisco Unified Videoconferencing Software CD-ROM. To use the online help, you must install the help
files for the MCU in a shared directory on your network and register the directory location in the
Administrator interface.
If you wish to install the online help on a shared network location and link it to the MCU Administrator,
perform the following steps:
Procedure
Step 1 Copy the online help library from the Cisco Unified Videoconferencing Software CD-ROM to a shared
folder on a PC on your network.
Step 2 Log in to the MCU Administrator interface.
Step 3 In the Online help URL field of the Board Web tab, enter the directory path to the help files you installed
on your PC.
The path must have the form:
file://computerName/sharedDirectory
where computerName is the name of the computer on the network and sharedDirectory is the path to the
Online Help folder on the CD-ROM. For example:
file://myComputer/Shared/Online Help
Step 4 Click Upload in the Cisco Unified Videoconferencing 3545 MCU Administrator toolbar, followed by
Refresh.
Step 5 You may need to log out and log back in to the MCU Administrator for the change to take effect.
Netscape Navigator Users
Online help files located on the local network and accessed using Netscape Navigator 4.x must be
located on a mapped network drive.