Filter
Top Products
3-4
Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide
OL-24619-02
Chapter 3 Installing the WAVE-594 and WAVE-694
Rack Mounting and Cabling the WAVE-594 and WAVE-694
Step 4 Attach the rear mount bracket holders (item #3 in Table 3-1) to the rear rack posts using four appropriate
rack screws (item #6 or #7 in Table 3-1). (see Figure 3-2)
Figure 3-2 Attaching Rear Rack Mount to the Rack
Step 5 Insert the chassis between the mounting posts and secure (see Figure 3-3):
a. Insert the chassis into the rack with the rear rack mount holders sliding into the rear rack mount
brackets.
b. Align the mounting holes in the front brackets with the mounting holes in the equipment rack.
c. Secure the chassis using four (two on each side) rack screws (item #6 or #7 in Table 3-1) through
the holes in the front brackets and into the threaded holes in the mounting post.
330142