Filter
Top Products
4-10
Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide
OL-24619-02
Chapter 4 Installing Hardware Options for the WAVE-594 and WAVE-694
Installing Memory
Caution Do not leave open spaces above or below an installed appliance in the rack cabinet. To help prevent
damage to appliance components, always install a filler panel to cover the open space and to help ensure
proper air circulation. See the documentation that comes with your rack cabinet for more information.
Step 10 Connect the cables and power cords. For information on connecting cables and power cords, see the
“Rack Mounting and Cabling the WAVE-594 and WAVE-694” section on page 3-2.
Step 11 Reboot the WAVE appliance.
Step 12 Use the show memory EXEC mode command to verify that the memory you installed is recognized by
the WAVE appliance.
Step 13 Repartition the disks, using the disk delete-data-partitions command, and reload.
Note Repartitioning the disks deletes all data, including all virtual blades on the hardware.
Note Repartitioning the disks is required after adding memory to reset the DRE space allocation.