Cisco Systems 7200 VXR Network Router User Manual


 
1-26
Cisco 7200 VXR Installation and Configuration Guide
OL-5013-08
Chapter 1 Cisco 7200 VXR Product Overview
Field-Replaceable Units
Note To prevent DRAM errors in the NPE-100, NPE-150, or NPE-200, and to ensure that your system
initializes correctly at startup, DRAM bank 0 (socket U18 and U25, or U11 and U25) must contain no
fewer than two SIMMs of the same type. You may also install two SIMMs of the same type in bank 1
(socket U4 and U12, or U42 and U52); however, bank 0 must always contain the two largest size SIMMs.
Primary cache R5000processor,
internal cache
U44
Secondary cache 512 KB 4 R5000processor,
unified external
cache
U16, U9, U109,
and U107
1. Location on processing engine board. See Figure 1-11.
2. ROM = read-only memory
Table 1-15 NPE-200 DRAM SIMM Memory Configurations
Total
DRAM DRAM Bank 0 Quantity DRAM Bank 1 Quantity Product Number
1
1. These products are also available as DRAM upgrades. For example to upgrade a network processing engine from 32 MB to
64 MB of DRAM, order product number MEM-NPE-64MB=.
32 MB U11 and U25 2 16-MB SIMMs U42 and U52 MEM-NPE-32MB=
64 MB U11 and U25 2 32-MB SIMMs U42 and U52 MEM-NPE-64MB=
128 MB U11 and U25 2 32-MB SIMMs U42 and U52 2 32-MB
SIMMs
MEM-NPE-128MB=
Table 1-14 NPE-200 Memory Specifications (continued)
Memory Type Size Quantity Description Location
1