Filter
Top Products
Chapter 2 Configuring User Profiles and CSS Parameters
Boot Configuration Mode Commands
2-10
Cisco Content Services Switch Basic Configuration Guide
78-11424-03
The variables are:
• ip_address or host - The IP address or host name of the server to receive the
file. Enter an IP address in dotted-decimal notation (for example,
192.168.11.1) or in mnemonic host-name format (for example,
myhost.mydomain.com).
• filename - The name you want to assign to the file on the server. Include the
full path to the file. Enter an unquoted text string with no spaces and a
maximum length of 32 characters.
For example, enter:
# copy profile tftp 192.168.3.6 \home\bobo\bobo-profile
Boot Configuration Mode Commands
Boot configuration mode contains all of the commands necessary to manage
booting the CSS and to maintain the software revision. To access this mode, use
the boot command from global configuration mode. The prompt changes to
(config-boot).
To access boot mode, enter:
(config)# boot
The CSS enters into boot mode.
(config-boot)#
For information about commands available in boot mode, refer to the following
sections:
• Unpacking an ArrowPoint Distribution Image (ADI)
• Removing an ArrowPoint Distribution Image (ADI)
• Specifying the Primary BOOT Configuration
• Specifying the Secondary Boot Configuration
• Configuring a Boot Configuration Record for the Passive SCM
• Showing the BOOT Configuration
• Booting the CSS from a Network Drive