Cisco Systems 78-11424-03 Network Router User Manual


 
2-11
Cisco Content Services Switch Basic Configuration Guide
78-11424-03
Chapter 2 Configuring User Profiles and CSS Parameters
Boot Configuration Mode Commands
Unpacking an ArrowPoint Distribution Image (ADI)
Use the unpack commandto unpack the ArrowPoint Distribution Image(ADI) on
the CSS disk. Enter the ADI filename as an unquoted text string with a maximum
length of 32 characters. For example, enter:
(config-boot)# unpack ap0500002.adi
Note Before unpacking the ADI, you must first copy the ADI to the CSS
disk. Use the copy ftp ftp_record filename boot-image command
to copy the ADI to the CSS disk.
Removing an ArrowPoint Distribution Image (ADI)
Use the remove command to remove an ArrowPoint Distribution Image (ADI)
that is not currently running on the CSS. To display a list of ADIs installed on
your CSS, enter remove ?. To display the ADI you are currently running, use the
version command.
Enter the ADI filename as an unquoted text string with a maximum length of 32
characters.
For example, to remove an ADI, enter:
(config-boot)# remove ap0410008
Specifying the Primary BOOT Configuration
Use the primary commandto specify the primary bootconfiguration. The options
for this boot mode command are:
primary boot-file - Specify the primary boot file
primary boot-type - Specify the primary boot method, local disk, using FTP,
or a network-mounted file system using FTP
primary config-path - Specify the path to a network CSS configuration
Refer to the following sections for more information on these options and
associated variables.