Filter
Top Products
2-7
Cisco Content Services Switch Basic Configuration Guide
78-11424-03
Chapter 2 Configuring User Profiles and CSS Parameters
Configuring User Profiles
Changing the CLI Prompt
The CLI default prompt displays as the product model number followed by the
# symbol. The CSS adds a # sign to the prompt automatically to indicate
SuperUser mode. To change the default prompt, enter the prompt command as
shown in the following example (maximum of 15 alphanumeric characters):
CSS11800# prompt CSS1-lab
CSS1-lab#
To save the new prompt, add it to user or default profiles. To restore the prompt
to its default, use the no prompt command.
Modifying the History Buffer
Use the history command to modify the history buffer length. The command line
history buffer stores the most recent CLI commands that you enter. Enter the
number of lines you want in the history buffer as an integer from 0 to 256. The
default is 20. This command is available in SuperUser mode.
To set the history buffer to 80 lines, enter:
# history length 80
To disable the history function (setting of 0), enter:
# history length 0
To restore the history buffer to the default of 20 lines, enter:
# no history length
Displaying the History Buffer
Use the show history command to display the history buffer. The history buffer
is cleared automatically upon reboot.