Filter
Top Products
4-31
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
Chapter 4 Error Messages
EID-3402 Unable to complete the switch request.
The {0} card is either not present or is not responding. Try
again after ensuring that the {0} card is present and is not
resetting.
Refer to the error message text.
EID-3403 Admin state transition has not been attempted on the monitored
port.
Refer to the error message text.
EID-3404 The far end IP address could not be set on the {0} termination.
The IP address cannot be:
loopback (127.0.0.0/8)
class D (224.0.0.0/4)
class E (240.0.0.0/4)
broadcast (255.255.255.255/32)
internal {1}
Refer to the error message text.
EID-4000 The {0} ring name cannot be changed now. A {0} switch is
active.
You cannot change the ring name because a
switch of the same ring type is active.
EID-4001 The {0} ring ID cannot be changed now. A {0} switch is active. You cannot change the ring ID because a
switch of the same ring type is active.
WID-4002 CAUTION: Reverting to an earlier software release may result
in TRAFFIC LOSS and loss of connectivity to the node. It may
require onsite provisioning to recover.
If the node was running {0} before, reverting will restore the
{0} provisioning, losing any later provisioning. If the node was
running some other version, reverting will LOSE ALL
PROVISIONING.
{1}
{2}
Refer to the warning message text.
EID-4003 The IOS console is disabled for the card in slot {0}. The card may not be an IOS-based card or it
may be rebooting.
EID-4004 Error cancelling software upgrade. CTC encountered an error while cancelling
the software upgrade.
EID-4005 {0} encountered while performing DB backup. CTC encountered the specified error during
database backup.
EID-4006 The file {0} does not exist or cannot be read. Refer to error message.
EID-4007 The size of {0} is zero. The size of the file that is being backed up
or restored is zero.
WID-4008 A software upgrade is in progress.
{0} can not proceed during a software upgrade.
Please try again after the software upgrade has completed.
The specified action cannot be performed
during a software upgrade. You must try
after the upgrade process is completed.
EID-4009 {0} encountered while restoring database. CTC encountered the specified error while
restoring the database.
EID-4010 The operation was terminated due to the following error:
{0}
Refer to the error message text.
Table 4-1 Error Messages (continued)
Error Warning
ID Error Warning Message Description