Filter
Top Products
7-23
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Chapter 7 Installing the IPS 4510 and IPS 4520
Installing and Removing the Slide Rail Kit
For square hole posts, square studs must be attached fully inside the square hole on the rack rail. For
threaded hole posts, the round stud must fully enter inside the threaded hole rack rail (Figure 7-9).
Note After installing the square or round studs into the rack post, verify that the locking clip is fully
seated and secure against the rack rail.
Figure 7-9 Square Studs for Square Hole Post
330561