Filter
Top Products
7-24
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Chapter 7 Installing the IPS 4510 and IPS 4520
Installing and Removing the Slide Rail Kit
Step 2 Secure the slide rail to the rack post with the provided #10-32 screws by tightening the screws at the front
and rear end of the slide rail to the rack post (Figure 7-10). Both front and rear rack posts must be secured
with the screws before you install the chassis.
Caution It is critical that the screws are installed and secured to the front and rear end of the slide rails.
Figure 7-10 Securing the Slide Rail to the Rack Post
332655