Filter
Top Products
7-27
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Chapter 7 Installing the IPS 4510 and IPS 4520
Installing and Removing the Slide Rail Kit
Step 5 Tighten the screws to secure the chassis to the rack (Figure 7-13). Use the upper hole to secure the
chassis to the rack.
a. For square hole racks, secure the chassis to the rack by installing the #10-32 screw into the cage nut
that you installed in Step 3.
b. For threaded hole racks, secure the front of the chassis by installing the #10-32 screws into the rack
threaded hole.
Figure 7-13 Securing the Chassis to the Outer Rail
330563