Filter
Top Products
Cisco EtherSwitch Service Modules Feature Guide
How to Configure the Cisco EtherSwitch Service Module
38
Cisco IOS Release 12.2(25)SEC
Step 13
enable
Example:
Switch> enable
Enters privileged EXEC mode on the Cisco EtherSwitch
service module.
Step 14
show ip interface brief
Example:
Switch# show ip interface brief
Displays brief version of the Cisco EtherSwitch service
module configuration information.
Step 15
control+shift+6 x
Example:
Switch# control+shift+6 x
Returns you to the router console while keeping the
console session to the switch intact.
Step 16
disconnect
Example:
Router# disconnect
Terminates the console session to the Cisco EtherSwitch
service module.
Step 17
show power inline
Example:
Router# show power inline
Displays the PoE statistics maintained on the Cisco
EtherSwitch service module.
Note PoE statistics are updated dynamically.
Output of the
show service-module status command
must be in steady state for inline power to function.
Command or Action Purpose