Filter
Top Products
Cisco EtherSwitch Service Modules Feature Guide
Troubleshooting the Cisco EtherSwitch Service Module Software
75
Cisco IOS Release 12.2(25)SEC
Step 12
copy running-configuration startup-configuration
Example:
Switch: copy running-config startup-config
Copies the configuration from the running
configuration file to the switch startup configuration
file.
• This procedure is likely to leave your Cisco
EtherSwitch service module virtual interface in a
shut down state.
• You can see which interface is in this state by
entering the show running-configuration
privileged EXEC command.
• To reenable the interface, enter the interface vlan
vlan-id global configuration command, and
specify the VLAN ID of the shut down interface.
With the Cisco EtherSwitch service module in
interface configuration mode, enter the no
shutdown command.
Step 13
reload
Example:
Switch: reload
Reloads the switch stack.
Command or Action Purpose